Common Arguments
Common arguments
A few sets of arguments are common between multiple commands. These arguments are still part of the command itself and must be placed after the command name.
Global arguments
These arguments are available for all commands.
Global arguments:
--cpu-profile string Enable CPU profiling and write the result to the given path
--debug Enable debug logging
--gops-agent Start gops agent in the background
--gops-agent-addr string Specify the address:port to use for the gops agent (default "127.0.0.1:0")
--no-color Disable colored output
--no-update-check Disable update check on startup
--use-system-python Use the system Python instead of the embedded Python.
Project arguments
These arguments are available for all commands that are based on a Kluctl project. They control where and how to load the kluctl project and deployment project.
Project arguments:
Define where and how to load the kluctl project and its components from.
-a, --arg stringArray Passes a template argument in the form of name=value. Nested args
can be set with the '-a my.nested.arg=value' syntax. Values are
interpreted as yaml values, meaning that 'true' and 'false' will
lead to boolean values and numbers will be treated as numbers. Use
quotes if you want these to be treated as strings. If the value
starts with @, it is treated as a file, meaning that the contents
of the file will be loaded and treated as yaml.
--args-from-file stringArray Loads a yaml file and makes it available as arguments, meaning that
they will be available thought the global 'args' variable.
--context string Overrides the context name specified in the target. If the selected
target does not specify a context or the no-name target is used,
--context will override the currently active context.
--git-cache-update-interval duration Specify the time to wait between git cache updates. Defaults to not
wait at all and always updating caches.
--kubeconfig existingfile Overrides the kubeconfig to use.
--local-git-group-override stringArray Same as --local-git-override, but for a whole group prefix instead
of a single repository. All repositories that have the given prefix
will be overridden with the given local path and the repository
suffix appended. For example,
'gitlab.com/some-org/sub-org=/local/path/to/my-forks' will override
all repositories below 'gitlab.com/some-org/sub-org/' with the
repositories found in '/local/path/to/my-forks'. It will however
only perform an override if the given repository actually exists
locally and otherwise revert to the actual (non-overridden) repository.
--local-git-override stringArray Specify a single repository local git override in the form of
'github.com/my-org/my-repo=/local/path/to/override'. This will
cause kluctl to not use git to clone for the specified repository
but instead use the local directory. This is useful in case you
need to test out changes in external git repositories without
pushing them.
--local-oci-group-override stringArray Same as --local-git-group-override, but for OCI repositories.
--local-oci-override stringArray Same as --local-git-override, but for OCI repositories.
-c, --project-config existingfile Location of the .kluctl.yaml config file. Defaults to
$PROJECT/.kluctl.yaml
--project-dir existingdir Specify the project directory. Defaults to the current working
directory.
-t, --target string Target name to run command for. Target must exist in .kluctl.yaml.
-T, --target-name-override string Overrides the target name. If -t is used at the same time, then the
target will be looked up based on -t <name> and then renamed to the
value of -T. If no target is specified via -t, then the no-name
target is renamed to the value of -T.
--timeout duration Specify timeout for all operations, including loading of the
project, all external api calls and waiting for readiness. (default
10m0s)
Image arguments
These arguments are available on some target based commands.
They control image versions requested by images.get_image(...) calls.
Image arguments:
Control fixed images and update behaviour.
-F, --fixed-image stringArray Pin an image to a given version. Expects
'--fixed-image=image<:namespace:deployment:container>=result'
--fixed-images-file existingfile Use .yaml file to pin image versions. See output of list-images
sub-command or read the documentation for details about the output format
Inclusion/Exclusion arguments
These arguments are available for some target based commands. They control inclusion/exclusion based on tags and deployment item pathes.
Inclusion/Exclusion arguments:
Control inclusion/exclusion.
--exclude-deployment-dir stringArray Exclude deployment dir. The path must be relative to the root
deployment project. Exclusion has precedence over inclusion, same as
in --exclude-tag
-E, --exclude-tag stringArray Exclude deployments with given tag. Exclusion has precedence over
inclusion, meaning that explicitly excluded deployments will always
be excluded even if an inclusion rule would match the same deployment.
--include-deployment-dir stringArray Include deployment dir. The path must be relative to the root
deployment project.
-I, --include-tag stringArray Include deployments with given tag.
Command Results arguments
These arguments control how command results are stored.
Command Results:
Configure how command results are stored.
--command-result-namespace string Override the namespace to be used when writing command results. (default
"kluctl-results")
--force-write-command-result Force writing of command results, even if the command is run in dry-run mode.
--keep-command-results-count int Configure how many old command results to keep. (default 5)
--keep-validate-results-count int Configure how many old validate results to keep. (default 2)
--write-command-result Enable writing of command results into the cluster. This is enabled by
default. (default true)
Helm arguments
These arguments mainly control authentication to Helm repositories.
Helm arguments:
Configure Helm authentication.
--helm-ca-file stringArray Specify ca bundle certificate to use for Helm Repository
authentication. Must be in the form
--helm-ca-file=<host>/<path>=<filePath> or in the deprecated
form --helm-ca-file=<credentialsId>:<filePath>, where
<credentialsId> must match the id specified in the helm-chart.yaml.
--helm-cert-file stringArray Specify key to use for Helm Repository authentication. Must be
in the form --helm-cert-file=<host>/<path>=<filePath> or in
the deprecated form
--helm-cert-file=<credentialsId>:<filePath>, where
<credentialsId> must match the id specified in the helm-chart.yaml.
--helm-creds stringArray This is a shortcut to --helm-username and --helm-password.
Must be in the form
--helm-creds=<host>/<path>=<username>:<password>, which
specifies the username and password for the same repository.
--helm-insecure-skip-tls-verify stringArray Controls skipping of TLS verification. Must be in the form
--helm-insecure-skip-tls-verify=<host>/<path> or in the
deprecated form
--helm-insecure-skip-tls-verify=<credentialsId>, where
<credentialsId> must match the id specified in the helm-chart.yaml.
--helm-key-file stringArray Specify client certificate to use for Helm Repository
authentication. Must be in the form
--helm-key-file=<host>/<path>=<filePath> or in the deprecated
form --helm-key-file=<credentialsId>:<filePath>, where
<credentialsId> must match the id specified in the helm-chart.yaml.
--helm-password stringArray Specify password to use for Helm Repository authentication.
Must be in the form --helm-password=<host>/<path>=<password>
or in the deprecated form
--helm-password=<credentialsId>:<password>, where
<credentialsId> must match the id specified in the helm-chart.yaml.
--helm-username stringArray Specify username to use for Helm Repository authentication.
Must be in the form --helm-username=<host>/<path>=<username>
or in the deprecated form
--helm-username=<credentialsId>:<username>, where
<credentialsId> must match the id specified in the helm-chart.yaml.
Registry arguments
These arguments mainly control authentication to OCI based registries. This is used by the Helm integration and by the OCI includes integration.
Registry arguments:
Configure OCI registry authentication.
--registry-ca-file stringArray Specify CA bundle to use for https verification. Must be
in the form --registry-ca-file=<registry>/<repo>=<filePath>.
--registry-cert-file stringArray Specify certificate to use for OCI authentication. Must be
in the form --registry-cert-file=<registry>/<repo>=<filePath>.
--registry-creds stringArray This is a shortcut to --registry-username,
--registry-password and --registry-token. It can be
specified in two different forms. The first one is
--registry-creds=<registry>/<repo>=<username>:<password>,
which specifies the username and password for the same
registry. The second form is
--registry-creds=<registry>/<repo>=<token>, which
specifies a JWT token for the specified registry.
--registry-identity-token stringArray Specify identity token to use for OCI authentication. Must
be in the form
--registry-identity-token=<registry>/<repo>=<identity-token>.
--registry-insecure-skip-tls-verify stringArray Controls skipping of TLS verification. Must be in the form
--registry-insecure-skip-tls-verify=<registry>/<repo>.
--registry-key-file stringArray Specify key to use for OCI authentication. Must be in the
form --registry-key-file=<registry>/<repo>=<filePath>.
--registry-password stringArray Specify password to use for OCI authentication. Must be in
the form --registry-password=<registry>/<repo>=<password>.
--registry-plain-http stringArray Forces the use of http (no TLS). Must be in the form
--registry-plain-http=<registry>/<repo>.
--registry-token stringArray Specify registry token to use for OCI authentication. Must
be in the form --registry-token=<registry>/<repo>=<token>.
--registry-username stringArray Specify username to use for OCI authentication. Must be in
the form --registry-username=<registry>/<repo>=<username>.